Factory Finish Tire Shine Trim Coating (Aerosol)
Factory Finish Tire Shine Trim Coating (Aerosol)
Factory Finish Tire Shine Trim Coating (Aerosol)

Factory Finish Tire Shine Trim Coating (Aerosol)

Regular price $42.99 Sale price $31.99 excl. GST $27.82
or 6 weekly interest-free payments from $5.33 with Laybuy

Product: #TVDSPRAY100
Not currently in stock

Factory Finish is the easiest way to restore a fresh black look to rubber, plastic, and vinyl parts, and protect them against the elements. Simply point, spray and enjoy a crisp like-new shine!  

Use This Dressing To: 

  • Restore a factory shine in one step
  • Shield and protect against future solar damage
  • Finish dry to the touch with no greasy feel
  • Wipe off excess to reveal a natural look
  • Replace chalky residue with crisp black shine

Application Could Not Be Simpler

Factory Finish sprays a new black shine onto trim, grilles, and engine parts in seconds. The custom tip sprays a fine aerosol mist to easily coat thin low-profile accessories, narrow trim pieces, window moldings, rubber coolant lines, and plastic engine covers with minimal overspray. The fine atomized formula stays where it sprays for maximum new shine with minimal product waste. 

Low Shine Protectant Dressing

Factory Finish actively nourishes and protects dried out rubber, plastic and vinyl trim pieces. The premium essential oils contained in in the formula penetrate deep into plastic and rubber to nourish and restore a like-new look and feel. Factory Finish comes blended with UV blocking agents that repel harmful sun rays that break down and damage grilles, vents, and trim. 


EXPLORE MORE ABOUT DRESSINGS
Explore thiS Product

WHICH PROTECTIVE DRESSING IS RIGHT FOR MY VEHICLE?

When it comes to cars, the details matter and just one slip could ruin the look of your whole ride! Your trim may seem like a minor aspect of your detail, but leaving it neglected will stand out like a sore thumb. Cleaning your trim then applying a premium dressing is all it takes to restore your trim, but which dressing is right for you?

 

How to Apply Trim and Vinyl Protectant

When it comes to cars, the details matter and just one slip could ruin the look of your whole ride! Your trim may seem like a minor aspect of your detail, but leaving it neglected will stand out like a sore thumb. Cleaning your trim then applying a premium dressing is all it takes to restore your trim, but which dressing is right for you?

When it comes to dressings, you have a variety of options. Let’s look at them closely.

WATER BASED DRESSINGS

Water based dressings are versatile products that can be used on the exterior and interior of your ride. They are usually white and creamy in texture and come in spray and cream format. In terms of shine, they can offer anywhere from a low satin sheen to a high shine.

OIL BASED DRESSINGS

Oil based dressings can be used on exterior surfaces such as trim and tires. They are usually clear or transparent in color and offer the glossiest shine and the deepest conditioning to plastic and rubber trims.

AEROSOL DRESSINGS

Aerosol dressings are a super easy way to add shine and color richness to hard to reach areas and super intricate pieces on your car. They work especially great on intricate grilles where you would otherwise be painstaking to work with. With aerosol dressings, you can put that q-tip away and simply spray on shine!

CERAMIC TRIM COATINGS

Carbon trim coatings offer the longest protection and deepest shine. Like all protective coatings, they dry hard on the surface for the ultimate protection. A protective coating like Carbon Flex C9 Trim Coating can last up to 2 years on your plastic trim! Keep in mind that a carbon trim coating can only be applied to plastic surfaces, not rubber or vinyl.

PREP

First, you’re going to want to clean the vinyl, rubber, or plastic surface to which you are applying the dressing. A clean surface means that the dressing will be able to stick to the surface and last its longest. The dressing is going to need something to hold on to. What you’ll be pulling off is not only dirt and grime, but also old dressings that could reduce adhesion. Think about trying to stick tape on a dirty surface. The tape is not going to stick well and peel off very easily. Now, imagine you cleaned the surface and then stuck the piece of tape on. It’s going to stick much better! The same thing happens with dressings, so don’t skip the important step of cleaning the surface! You can use a premium all-purpose cleaner like Nonsense to clean the surface. Simply spray onto a microfiber towel, clean the surface, and then buff off. If need be, you can use a soft bristled brush to really get into the pores of the surface to extract deeply embedded dirt and grime.

APPLY

Next, you’re going to want to shake your dressing, then apply 2- 5 sprays or a few drops of dressing directly into a foam or microfiber applicator pad. If you are looking for super precise application, try using a foam applicator. Spread the dressing over the entire workpiece, then work and rub deep into the surface. Massage it gently like you would skin. This way, you are getting into all the pores of the surface. Buff off any excess with a clean microfiber towel. Wait 5 – 10 minutes, then add additional layers as needed. If you happen to get any dressing on your paint or glass, don’t fret. It simply wipes off with a quick detail spray!

How To Use:
  1. Shake well before using.
  2. Hold the can 5 - 10 inches from the surface and mist an even coat over any clean and dry rubber, plastic, or vinyl part.
  3. Wipe off excess if desired with a clean Microfiber towel.
  4. Leave to air dry for an extra rich look, or wipe off excess for more “natural” crisp shine.